Maybe it was reset after a upgrade running in the background: From the Manual: Please note - your DAW may not automatically select the Scarlett 2i2 as its default I/O device. In this case, you must manually select the driver on your DAW's Audio Setup* page (select "Scarlett 2i2" driver for Mac, or "Focusrite USB 2.0" driver for Windows).
Your Focusrite Scarlett 2i2 has combo jacks, accepting a microphone signal on an XLR plug or a Line input on a TRS jack. You will use the jack inputs. When it comes to balanced or unbalanced audio, many sockets are designed so that plugging in a TS jack gives you an unbalanced connection, while a TRS allows a balanced connection to whatever
On the Scarlett Solo and 2i2 set the Direct Monitor switch to "On". On the Scarlett 2i4 set the Direct Monitor knob to '12:00'. If you are using the Scarlett CM25 (Bundled with Studio Packs) or any other Condenser microphone be sure that you have Phantom Power engaged and you are connected via an XLR cable. Instruments and Line Level sources
The Focusrite Scarlett 2i2 is a portable and affordable audio interface that has gained popularity over the last couple of years. However, some users have experienced difficulties when using it with Windows 11. When it comes to using the Focusrite Scarlett 2i2 with Windows 11, there are both positives and negatives to consider. Here's an
Focusrite Scarlett 2i2 Overview. The Focusrite Scarlett 2i2 includes two combo inputs, which can record either a microphone, an instrument, or a line level source such as the output of a mixer.. This interface also has a headphone output on the front and two line outputs on the back, but the 2i2 gives you a separate volume knob for each of these outputs.
A common mistake is to set Audacity to play your live performance back to your headphones. That will produce a delay or echo. You must overdub while listening to the 2i2. Many of the tricks of the 2i2 could be a result of ASIO software; for example, live effects monitoring. Audacity doesn't directly support ASIO.
.
what comes with focusrite scarlett 2i2